Thursday, November 26, 2009

How to Do Your Own Auto Glass Chip Repair

car insurance tuningA repair that is often overlooked until too late is auto glass
chip repair. While a chip in the windshield may not seem like much environmental waste pollution and the stress of temperature changes can cause it to grow over time, resulting in cracks and repairs more expensive. However, it has to come to this. With this article, and a do-it-yourself glass repair kit cars, you can fix a chip in the windshield before it gets worse.

Inspecting the damage

The first step in any repair process to inspect the damage. You can do it yourself or even take your car to a professional if necessary. A general rule is that if windshield damage is limited to a minor chip or Knick, you must repair. Often, small spider cracks can be repaired as well, but the cracks with long veins present a major problem and usually are not repairable. If in doubt, consult a professional for their opinion.

Select the repair kit

If you determine that your chip is actually glass repair, a trip to your local auto parts store will offer different options for repair. Although offered by different companies, most do-it-yourself kits windshield work the same way and have similar elements. The kits typically include a stabilizer or a base that resembles a suction cup, a nozzle or applicator, a tube of resin and a curing adhesive film.

Perform the repair

Before diving into the repair, be sure to read carefully the detailed instructions with the kit. Once done, the first step is to clean the chip and the area around it as best as possible with glass cleaner. Wipe dry with a clean towel afterwards. If there is any debris on the chip, a safety pin or similar item can be used to remove it.

When the area is clean, the stabilizer or base shall be affixed to the windshield, usually with an adhesive. Make sure it is carefully positioned and that the seal between it and the glass is tight. The next step usually involves placing the applicator nozzle or the stabilizer. Generally, the air is extracted from between the stabilizer and the windscreen, while injecting the resin. The vacuum thus created helps to draw the resin into the crack and to protect it from pollutants in the air.

Once the resin has cured for the time specified in the instructions, applicator and the stabilizer are removed. The next step usually involves placing a drop of resin on the repair and then placing the cured film thereof. When making the film, make sure to remove any air bubbles that may be present. Again, the curing of the resin in the amount of time specified in the instructions.

Once the film is removed, if any part of the repair is not uniform, usually can be solved with a razor blade. Any excess resin or adhesive residue can be cleaned with glass cleaner. If completed correctly, the repair should be kept fairly quiet at this point.

While a chip in the windshield may seem insignificant, it is important to take care as soon as possible before it becomes worse. With the information provided in this article, you will find it a simple job that can save you big money in the long term.
http://www.articlesbase.com/automotive-articles/how-to-do-your-own-auto-glass-chip-repair-1507480.html